Configure LVM on Sabayon Linux 4

Sabayon 4Sabayon Linux 4 is one of a handful of Linux distro that uses LVM as the default disk partitioning scheme. Linux Logical Volume Manager (LVM) is a feature built into the Linux kernel that brings some benefits to hard disk configuration and management under Linux that is not possible with the traditional method of disk management. It makes it possible to, for example, dynamically resize a logical volume (partition) on a running system.

If you are new to Linux, and to the concept of logical volume management, we recommend that you read the basic benefits of using LVM, and how Linux distros configure and manage LVM.

By default, the Sabayon installer creates two logical volumes – one for swap and the other for the root (/) partition. This approach is not necessarily the best way of setting up LVM. In this tutorial, we give step-by-step instructions on how to create a custom LVM setup on Sabayon Linux 4.

Before delving into the tutorial, we should point out that on Sabayon, it is not yet possible to create encrypted LVM volumes. If that is important to you, you should consider Debian, Fedora, or Mandriva.

Setting up LVM involves the following steps:

  1. Create a non-LVM partition for /boot
  2. Create a Physical Volume
  3. Create a Volume Group and assign the Physical Volume to the Volume Group
  4. Finally, create Logical Volumes

For this tutorial, we intend to create separate logical volumes for / (the root directory), /usr, /var, /tmp, /home, /opt, /usr/local, and swap. To reduce the number of screenshots, we begin this tutorial at the point in the installation process where the installer presents the hard disk(s) detected on the PC, and end it after all the logical volumes have created. For a complete step-by-step installation guide – with screenshots, read the Sabayon Linux 4 installation guide

Related Post:  Configurable Menu: Install the best menu for Linux Mint 17/17.1 Cinnamon

Now, on to the tutorial.

The default method of disk partitioning is Automatic, but since we want to create a custom set up, select Manual, then click on the Forward button.

This screenshot just shows the disk(s) and free space available for use. To create the first partition, select the free space as shown, and then click on the New button.

When configuring LVM, the first partition you create must be a non-LVM partition for /boot. The boot directory, /boot, is where all the static files required to boot the system are stored. Most distros typically assign about 100 MB to /boot, and this should be more than enough. The installer should set it up as a primary partition, but just to be sure, make sure that Force to be a primary partition is checked.

With /boot out of the way, now is the time to create a Physical Volume (PV). Creating a PV initializes the rest of the space for use by LVM. To do this, select the free space, then click on the New button.

Related Post:  Linux Mint 6 Installation with Custom Disk Partitioning

The only options you need to change to create a PV is to set the File System Type to physical volume (LVM), and make sure, if you intend to use all the available free space for LVM, that the radio button next to Fill to maximum allowable size is on. Click OK. If you were doing this from the command line, this is where the pvcreate command would have been used.

Now that a PV has been created, the next step is to create a Volume Group (VG), assign the PV to the VG, and then create logical volumes from the available space on the VG. In LVM parlance, a logical volume (LV) is the equivalent of a partition, and a VG is just a virtual container of LVs and PVs. To perform the aforementioned tasks, select the PV (/dev/sda2 on the screenshot) you just created and click on the LVM button.

The first thing we need to do is name the VG. By default, the name of the VG is VolGroup00, but you can give it any name you feel comfortable with. Because only one PV has been created, notice that is automatically selected under Physical Volumes to use. With the VG named, and the PV assigned to the VG, click on the Add button to the lower right side of the window to start creating LVs.

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hola! Did you notice that LinuxBSDos.com no longer run network ads?  Yep, no more ads from the usual suspects that track and annoy you across the Internet. But since I still need to pay to keep the site running, feel free to make a small donation by PayPal or your favorite cryptocurrency.

  • Bitcoin
  • Ethereum
  • Xrp
  • Bitcoin cash
  • Bitcoin sv
  • Litecoin
  • Binance coin
  • Cardano
  • Ethereum classic
Scan to Donate Bitcoin to bc1qzvlte2m224zkayhdc7fdfjkp2rsgt0l5a496ua

Donate Bitcoin to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin

Scan to Donate Ethereum to 0x0F4362DFF77F3Ba0Dc637F5f3Eba35D09a2fA60C

Donate Ethereum to this address

Scan the QR code or copy the address below into your wallet to send some Ethereum

Scan to Donate Xrp to r4ggjvL36njsMCYTkJ3S7cTHscPsMsSGQv

Donate Xrp to this address

Scan the QR code or copy the address below into your wallet to send some Xrp

Scan to Donate Bitcoin cash to qrs0dedzp9t55af3nfwypydghp29r0xguy9s20fz2k

Donate Bitcoin cash to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin cash

Scan to Donate Bitcoin sv to 15K9TLyVDBtLuG9cYvXCX9SSkq9C9oUKHK

Donate Bitcoin sv to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin sv

Scan to Donate Litecoin to LetJ9QQMb7u2LMZ9Tu6rtHwcBcQFW98fbG

Donate Litecoin to this address

Scan the QR code or copy the address below into your wallet to send some Litecoin

Scan to Donate Binance coin to bnb1ga8trq08ssqepd90v6225nzfgy448pu5pw8gxp

Donate Binance coin to this address

Scan the QR code or copy the address below into your wallet to send some Binance coin

Scan to Donate Cardano to addr1qx2354yw49etstfljpdhwja3ajjlt487lg95vu9ngy2q6vu4rf2ga2tjhqknlyzmwa9mrm997h20a7stgectxsg5p5esq5l7d9

Donate Cardano to this address

Scan the QR code or copy the address below into your wallet to send some Cardano

Scan to Donate Ethereum classic to 0xcD6CC972a2297FcafACDcfE042C55C69516a9264

Donate Ethereum classic to this address

Scan the QR code or copy the address below into your wallet to send some Ethereum classic

Subscribe for updates. Trust me, no spam!

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.

Upcoming events

5 Responses

  1. “However short of a server farm, you do not ever need to use LVM, it is a much over used feature”. Unless you want to add a new hard drive, replace an existing one, or make a backup. if you do any of these or may someday need to do this you will greatly appreciate LVM.

  2. So what about encrypted LVM volumes? You mention they are NOT supported? Do you know if there is any chance this will change in the near future?

  3. @Azerthoth

    And the reason why the “default size right off the DVD is 12 Gig” is because all three desktop environemnts – KDE, Gnome, and Xfce – are installed by default. Question is, “why do you need to install all three desktop environments?”

    If you follow the directions in this installation guide, the default will do just fine.

    And if you think that LVM is useful only in a server farm then you do not really know much about LVM.

  4. One thing is clear, you havent spent much time with sabayon. Your defaults are not just wrong, they are so small that it wont install. Sabayons default size right off the DVD is 12 Gig.

    Sabayon has an automatic set up for LVM, point it at a 30 Gig partition and let it go. If you need to adjust mount points you can do so later. However short of a server farm, you do not ever need to use LVM, it is a much over used feature. Any one halfway competent individual can set the fstab up properly.

Leave a Reply to Glutrino Cancel reply

Your email address will not be published. Required fields are marked *

Get the latest

On social media
Via my newsletter

Partner links

1. Attend Algorithm Conference, a top AI and ML event for 2021.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.
Hacking, pentesting distributions

Linux Distributions for Hacking

Experts use these Linux distributions for hacking, digital forensics, and pentesting.

Categories
Archives

The authors of these books are confirmed to speak during

Algorithm Conference

T-minus AI

Author was the first chairperson of AI for the U.S. Air Force.

The case for killer robots

Author is the Director of the Center for Natural and Artificial Intelligence.

Why greatness cannot be planned

Author works on AI safety as a Senior Research Scientist at Uber AI Labs.