Dual-boot Kubuntu 15.10 and Windows 10 on a PC with UEFI firmware

Lenovo G50 boot menu

Kubuntu is a desktop distribution based on Ubuntu, and Kubuntu 15.10, the latest, stable, edition, is based on Ubuntu 15.10. Both were released late last month.

This tutorial shows how to dual-boot Kubuntu 15.10 and Windows 10 on a computer with UEFI firmware, and on a single hard drive. A future tutorial will show how to dual-boot both operating systems on a computer with two hard drives.

For this tutorial, you’ll, of course, need to have a computer with Windows 10 installed, one with free space on the C drive that can be recovered to use for installing Kubuntu 15.10. In Figure 1, which is a screenshot of the Windows 10 partition manager on the computer used for this tutorial, the free space recovered from the C drive is highlighted.

From that free, unallocated disk space, we’ll create the following partitions for Kubuntu: a root partition; a partition for your home folder (optional, but nice to have); and a swap partition.

Windows 10 partitions
Figure 1: Windows 10 partitions as seen from the Windows 10 partition manager

You’ll also need to download an installation image of Kubuntu 15.10 from here. Then burn it to a blank DVD or transfer it to a USB stick. Once that’s finished, put the installation media in place and reboot the computer. Just as the system is booting and before it boots into the default boot device, access the boot menu by pressing either the F11 or F12 key.

While on the boot menu, select the entry that will boot into the UEFI-aware version of the Kubuntu 15.10 installer. On the boot menu of the computer used for this tutorial, that entry is shown in Figure 2. When you select it and press the ENTER key, you’ll be taken to another screen where you’ll be given the following options: ubuntu (this is the option to select, as it will boot into the Kubuntu 15.10 Live desktop); OEM Install (this is for PC vendors, so ignore it); Check disk for defects (use if you need to verify that the installation media has no defects).

Lenovo G50 boot menu
Figure 2: The boot menu on a Lenovo G50 showing entries for a USB stick and Windows 10 Boot Manager

After booting into the Live desktop, launch the installer by clicking on its icon on the desktop. Then click through the first few steps until you get to the one shown in Figure 3. The options here are the disk partitioning methods. By default, the installer will want to wipe Windows 10 from the disk and install Kubuntu 15.10 in its place. Since that’s not what you want, you’ll have to select another option that will make it possible to create partitions for Kubuntu using the free space that was recovered from the C drive.

Kubuntu 15.10 partition methods
Figure 3: Kubuntu 15.10 partition methods

That option is Manual, so select it and click Continue.

Kubuntu 15.10 manual partition
Figure 4: Kubuntu 15.10 installer manual partition option

That should open the installer’s manual disk partitioning tool, where the disk and disk partitions detected on the system should be listed. Depending on your installation of Windows 10, the first four or five partitions will belong to it, followed by the free space recovered from its C drive. Make a note of the partition of Type efi. That’s the EFI System Partition (ESP), and it will be the device for installing the boot loader. For this tutorial, it’s /dev/sda2.

Related Post:  How to install Markpado Markdown editor on Kubuntu 15.10

To start creating partitions for Kubuntu 15.10, select the free space and click the Add button. This step has to be repeated for all the partitions you’ll create.

Kubuntu 15.10 manual partitioning tool
Figure 5: Kubuntu 15.10 manual disk partitioning tool

That should open the installer’s partition editor. For each partition that you create using this tool, you only need to specify the size, the file system (from Use as), and the mount point (from Mount point).

Kubuntu 15.10 partition editor
Figure 6: Kubuntu 15.10 partition editor

For the root partition, give it about 15,000 MB (15 GB) to 20,000 MB (20 GB). That’s about twice the recommended minimum disk space for installing Kubuntu 15.10. For the mount point, select /. The default file system is what should be selected for this partition and the next one, so leave Use as unchanged. Click OK.

Creating root partition Kubuntu 15.10
Figure 7: Creating root partition for Kubuntu 15.10

For the home partition, allocate most of the available disk space to it, then select /home from Mount point. OK.

Creating home partition Kubuntu 15.10
Figure 8: Creating home partition for Kubuntu 15.10

The last partition will be for swap, disk space that the system may use as virtual memory. A size of 1,000 MB (1 GB) to 4,000 MB (4 GB) is recommended. From Use as, select swap area. OK.

Creating swap partition Kubuntu 15.10
Figure 9: Creating swap partition for Kubuntu 15.10

Back to the main disk partitioning tool’s window one last time, select the correct device for installing the boot loader under the Boot loader section. After making the right selection, click Install Now.

Dual-booting Windows 10 and Kubuntu 15.10
Figure 10: Completed partitions for dual-booting Windows 10 and Kubuntu 15.10

At this step, verify that the correct partitions are going to be formatted, then click Continue.

Format Kubuntu 15.10 partitions
Figure 11: Kubuntu 15.10 partitions to be formatted

After the installation has completed, reboot the computer. It should reboot into Kubuntu 15.10, but only after making a brief stop at the GRUB boot menu, where you’ll see entries for the Windows 10 Boot Manager besides a few entries for GRUB. After booting into Kubuntu 15.10, reboot into Windows 10 just so you’re sure that it still works.

Related Post:  Kubuntu 10.10 review

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hola! Did you notice that LinuxBSDos.com no longer run network ads?  Yep, no more ads from the usual suspects that track and annoy you across the Internet. But since I still need to pay to keep the site running, feel free to make a small donation by PayPal or your favorite cryptocurrency.

  • Bitcoin
  • Ethereum
  • Xrp
  • Bitcoin cash
  • Bitcoin sv
  • Litecoin
  • Binance coin
  • Cardano
  • Ethereum classic
Scan to Donate Bitcoin to bc1qzvlte2m224zkayhdc7fdfjkp2rsgt0l5a496ua

Donate Bitcoin to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin

Scan to Donate Ethereum to 0x0F4362DFF77F3Ba0Dc637F5f3Eba35D09a2fA60C

Donate Ethereum to this address

Scan the QR code or copy the address below into your wallet to send some Ethereum

Scan to Donate Xrp to r4ggjvL36njsMCYTkJ3S7cTHscPsMsSGQv

Donate Xrp to this address

Scan the QR code or copy the address below into your wallet to send some Xrp

Scan to Donate Bitcoin cash to qrs0dedzp9t55af3nfwypydghp29r0xguy9s20fz2k

Donate Bitcoin cash to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin cash

Scan to Donate Bitcoin sv to 15K9TLyVDBtLuG9cYvXCX9SSkq9C9oUKHK

Donate Bitcoin sv to this address

Scan the QR code or copy the address below into your wallet to send some Bitcoin sv

Scan to Donate Litecoin to LetJ9QQMb7u2LMZ9Tu6rtHwcBcQFW98fbG

Donate Litecoin to this address

Scan the QR code or copy the address below into your wallet to send some Litecoin

Scan to Donate Binance coin to bnb1ga8trq08ssqepd90v6225nzfgy448pu5pw8gxp

Donate Binance coin to this address

Scan the QR code or copy the address below into your wallet to send some Binance coin

Scan to Donate Cardano to addr1qx2354yw49etstfljpdhwja3ajjlt487lg95vu9ngy2q6vu4rf2ga2tjhqknlyzmwa9mrm997h20a7stgectxsg5p5esq5l7d9

Donate Cardano to this address

Scan the QR code or copy the address below into your wallet to send some Cardano

Scan to Donate Ethereum classic to 0xcD6CC972a2297FcafACDcfE042C55C69516a9264

Donate Ethereum classic to this address

Scan the QR code or copy the address below into your wallet to send some Ethereum classic

Subscribe for updates. Trust me, no spam!

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.

Upcoming events

3 Responses

  1. Oh boy, I wish I had found this guide before attempting my first dual-boot.

    Suffice to say, most of the guides online said to keep boot loader path as /sda and I did that. Everything went along successfully and then turns out I couldn’t access Windows 10, wiped the whole drive and will try and learn from the mistakes of not doing enough research

    This guide will work for 19.10 as well right?

  2. I have been running the same laptop with various Linux distros for ten years. Just got a new laptop and not having set up a dual boot in a decade this resource was invaluable as things have changed a bit! Only thing I had to do differently was download a third party partition editor for the Linux installer to recognize the free space. Awesome! Thanks!

Leave a Reply to finid Cancel reply

Your email address will not be published. Required fields are marked *

Get the latest

On social media
Via my newsletter

Partner links

1. Attend Algorithm Conference, a top AI and ML event for 2021.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.
Hacking, pentesting distributions

Linux Distributions for Hacking

Experts use these Linux distributions for hacking, digital forensics, and pentesting.

Categories
Archives

The authors of these books are confirmed to speak during

Algorithm Conference

T-minus AI

Author was the first chairperson of AI for the U.S. Air Force.

The case for killer robots

Author is the Director of the Center for Natural and Artificial Intelligence.

Why greatness cannot be planned

Author works on AI safety as a Senior Research Scientist at Uber AI Labs.