Lenovo G50 boot menu

Kubuntu is a desktop distribution based on Ubuntu, and Kubuntu 15.10, the latest, stable, edition, is based on Ubuntu 15.10. Both were released late last month.

This tutorial shows how to dual-boot Kubuntu 15.10 and Windows 10 on a computer with UEFI firmware, and on a single hard drive. A future tutorial will show how to dual-boot both operating systems on a computer with two hard drives.

For this tutorial, you’ll, of course, need to have a computer with Windows 10 installed, one with free space on the C drive that can be recovered to use for installing Kubuntu 15.10. In Figure 1, which is a screenshot of the Windows 10 partition manager on the computer used for this tutorial, the free space recovered from the C drive is highlighted.

From that free, unallocated disk space, we’ll create the following partitions for Kubuntu: a root partition; a partition for your home folder (optional, but nice to have); and a swap partition.

Windows 10 partitions
Figure 1: Windows 10 partitions as seen from the Windows 10 partition manager

You’ll also need to download an installation image of Kubuntu 15.10 from here. Then burn it to a blank DVD or transfer it to a USB stick. Once that’s finished, put the installation media in place and reboot the computer. Just as the system is booting and before it boots into the default boot device, access the boot menu by pressing either the F11 or F12 key.

While on the boot menu, select the entry that will boot into the UEFI-aware version of the Kubuntu 15.10 installer. On the boot menu of the computer used for this tutorial, that entry is shown in Figure 2. When you select it and press the ENTER key, you’ll be taken to another screen where you’ll be given the following options: ubuntu (this is the option to select, as it will boot into the Kubuntu 15.10 Live desktop); OEM Install (this is for PC vendors, so ignore it); Check disk for defects (use if you need to verify that the installation media has no defects).

Lenovo G50 boot menu
Figure 2: The boot menu on a Lenovo G50 showing entries for a USB stick and Windows 10 Boot Manager

After booting into the Live desktop, launch the installer by clicking on its icon on the desktop. Then click through the first few steps until you get to the one shown in Figure 3. The options here are the disk partitioning methods. By default, the installer will want to wipe Windows 10 from the disk and install Kubuntu 15.10 in its place. Since that’s not what you want, you’ll have to select another option that will make it possible to create partitions for Kubuntu using the free space that was recovered from the C drive.

Kubuntu 15.10 partition methods
Figure 3: Kubuntu 15.10 partition methods

That option is Manual, so select it and click Continue.

Kubuntu 15.10 manual partition
Figure 4: Kubuntu 15.10 installer manual partition option

That should open the installer’s manual disk partitioning tool, where the disk and disk partitions detected on the system should be listed. Depending on your installation of Windows 10, the first four or five partitions will belong to it, followed by the free space recovered from its C drive. Make a note of the partition of Type efi. That’s the EFI System Partition (ESP), and it will be the device for installing the boot loader. For this tutorial, it’s /dev/sda2.

Related Post:  How to custmize KDE's window titlebar buttons

To start creating partitions for Kubuntu 15.10, select the free space and click the Add button. This step has to be repeated for all the partitions you’ll create.

Kubuntu 15.10 manual partitioning tool
Figure 5: Kubuntu 15.10 manual disk partitioning tool

That should open the installer’s partition editor. For each partition that you create using this tool, you only need to specify the size, the file system (from Use as), and the mount point (from Mount point).

Kubuntu 15.10 partition editor
Figure 6: Kubuntu 15.10 partition editor

For the root partition, give it about 15,000 MB (15 GB) to 20,000 MB (20 GB). That’s about twice the recommended minimum disk space for installing Kubuntu 15.10. For the mount point, select /. The default file system is what should be selected for this partition and the next one, so leave Use as unchanged. Click OK.

Creating root partition Kubuntu 15.10
Figure 7: Creating root partition for Kubuntu 15.10

For the home partition, allocate most of the available disk space to it, then select /home from Mount point. OK.

Creating home partition Kubuntu 15.10
Figure 8: Creating home partition for Kubuntu 15.10

The last partition will be for swap, disk space that the system may use as virtual memory. A size of 1,000 MB (1 GB) to 4,000 MB (4 GB) is recommended. From Use as, select swap area. OK.

Creating swap partition Kubuntu 15.10
Figure 9: Creating swap partition for Kubuntu 15.10

Back to the main disk partitioning tool’s window one last time, select the correct device for installing the boot loader under the Boot loader section. After making the right selection, click Install Now.

Dual-booting Windows 10 and Kubuntu 15.10
Figure 10: Completed partitions for dual-booting Windows 10 and Kubuntu 15.10

At this step, verify that the correct partitions are going to be formatted, then click Continue.

Format Kubuntu 15.10 partitions
Figure 11: Kubuntu 15.10 partitions to be formatted

After the installation has completed, reboot the computer. It should reboot into Kubuntu 15.10, but only after making a brief stop at the GRUB boot menu, where you’ll see entries for the Windows 10 Boot Manager besides a few entries for GRUB. After booting into Kubuntu 15.10, reboot into Windows 10 just so you’re sure that it still works.

Related Post:  How to install Markpado Markdown editor on Kubuntu 15.10

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hola! Did you notice that LinuxBSDos.com no longer runs network ads?  Yep, no more ads from the usual suspects that track you across the Internet.  But since  I still need to pay to keep the site running, feel free to make a small donation by PayPal.

Subscribe for updates. Trust me, no spam!

Mailchimp Signup Form

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event for 2020.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.

3 Responses

  1. Oh boy, I wish I had found this guide before attempting my first dual-boot.

    Suffice to say, most of the guides online said to keep boot loader path as /sda and I did that. Everything went along successfully and then turns out I couldn’t access Windows 10, wiped the whole drive and will try and learn from the mistakes of not doing enough research

    This guide will work for 19.10 as well right?

  2. I have been running the same laptop with various Linux distros for ten years. Just got a new laptop and not having set up a dual boot in a decade this resource was invaluable as things have changed a bit! Only thing I had to do differently was download a third party partition editor for the Linux installer to recognize the free space. Awesome! Thanks!

Leave a Reply to Kris Cancel reply

Your email address will not be published. Required fields are marked *

Get the latest

On social media
Via my newsletter
Mailchimp Signup Form

Partner links

1. Attend Algorithm Conference, a top AI and ML event for 2021.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.
Hacking, pentesting distributions

Linux Distributions for Hacking

Experts use these Linux distributions for hacking, digital forensics, and pentesting.

Categories
Archives

The authors of these books are confirmed to speak during

Algorithm Conference

T-minus AI

Author was the first chairperson of AI for the U.S. Air Force.

The case for killer robots

Author is the Director of the Center for Natural and Artificial Intelligence.

Why greatness cannot be planned

Author works on AI safety as a Senior Research Scientist at Uber AI Labs.

Anastasia Marchenkova

An invitation from Anastasia Marchenkova

Hya, after stints as a quantum researcher at Georgia Tech Quantum Optics & Quantum Telecom Lab, and the University of Maryland Joint Quantum Institute, I’m now working on superconducting qubit quantum processors at Bleximo. I’ll be speaking during Algorithm Conference in Austin, Texas, July 16 – 18, 2020. Meet me there and let’s chat about progress and hype in quantum computing.