Reboot Android-x86

The Android-x86 project provides ISO installation images of Android that can be installed on personal computers, which is cool, because that makes it possible to use the most popular operating system on the planet without buying an Android tablet or smartphone.

The latest stable release is Android-x86 4.4-r2. This tutorial shows how to install it on a USB stick, so you can have an Android device that you can boot and use from any modern computer.

What You’ll Need:
If you want to follow along, you’ll need two USB sticks, one to use as the installation media, the other as the installation target. The ISO installation image is less than 400 MB in size, so a 1 GB USB stick will do as the installation media. You may download the latest ISO installation image from android-x86.org/download.

The target USB stick should also be at least 1 GB, because a fresh installation of Android-x86 takes up about 1 GB of disk space. For this tutorial, I used an 8 GB USB stick.

How To Do What To Do:
1. Transfer the installation image to a USB stick: Assuming that you downloaded the ISO image to a Linux computer, you may transfer it to a USB stick using the dd command like this:

# Using the dd command 
# /dev/sdc is the USB stick

dd if=android-x86-4.4-r2.iso of=/dev/sdc bs=1M

2. Format the target USB stick: To make the installation easier, be sure to format the target USB stick, or just wipe it, if it contains data. Then Insert both USB sticks to free USB ports on the computer and reboot. If you did not set the computer to boot from external media, press the F key that will bring up the computer’s boot menu and select the right one to boot into.

Related Post:  Search your Android phone with written gestures

Figure 1 shows the entries in the boot menu of the computer used for this tutorial. The USB: PNY USB 2.0 FD 1100 entry is the USB stick that holds the installation image, while the USB: SanDisk Cruzer Glide 1.26 entry is the target USB stick. The computer has an internal 250 GB hard disk with Linux Mint 17.1, Ubuntu 14.10 and Windows 8 installed in triple-boot fashion.

Linux computer boot menu
Figure 1: Boot menu of computer showing detected storage media

This is the Android-x86 boot menu. You have the option to boot into a live desktop or straight to the installer. The latter option seems to be the most appropriate thing to do here.

Android-x86 4.4-r2 boot menu
Figure 2: Entries on the boot menu of Android-x86 4.4-r2 installation image

You’ll then be shown a window that shows the disks and disk partitions detected by the installer. In this case, sdb1 belongs to the target USB stick. The sdc entries belong to the installation media.

Android-x86 disks
Figure 3: Disks detected by the Android-x86 installer

After selecting the target disk, you’ll be given the option to format it. You definitely want to format it. I chose to format mine using the Ext3 file system.

Android-x86 ext3 file system
Figure 4: File systems supported by the Android-x86 installer

Yes, we are sure.

Android-x86 format USB stick
Figure 5: Options to format the target USB stick.

Yes, install the GRUB boot loader to the USB stick. A plus for the installer is that it does not mess with the contents of the internal hard disk, which is good to know, because in a future tutorial, I’ll show how to dual-boot Android-x86 4.4r2 and another popular Linux distribution.

Android-x86 install GRUB
Figure 6: Install GRUB boot loader to the USB stick

Yes, I think it’s better to install the /system directory read-write.

Android-x86 /system directory
Figure 7: Make the /system directory read-write

This image just shows the writing process. Less than 750 MB of data is written to the USB stick.

Android-x86 /system
Figure 8: Writing to the /system directory.

Installation should take less than two minutes. I did not encounter any problem, so next thing I had to do was reboot.

Reboot Android-x86
Figure 9: Reboot newly installed Android-x86 from a USB stick

On rebooting, you’ll be presented with the GRUB menu. Selecting the default option, I was able to boot into the Android-x86 desktop. My test computer does not have a wireless card, but the system was able to auto-configure the Ethernet card.

Android-x86 4.4-r2 GRUB boot
Figure 10: GRUB boot menu of Android-x86 4.4-r2

So I now have Android 4.4 installed on a USB stick, which I can use from any personal computer. And that’s awesome, because I don’t have any Android device.

Related Post:  How to make DuckDuckGo the default search engine in Chromium

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hola! Did you notice that LinuxBSDos.com no longer runs network ads?  Yep, no more ads from the usual suspects that track you across the Internet.  But since  I still need to pay to keep the site running, feel free to make a small donation by PayPal.

Subscribe for updates. Trust me, no spam!

Mailchimp Signup Form

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event for 2020.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.

17 Responses

  1. I have Fedora 17 installed and it installed the Firewalld daemon during the initial clean install, I didn’t think I was installing a beta version either, which some say came with Firewalld, but that the final version of Fedora 17 should not have had Firewalld in it as there was no gui configuration tool at the time.

    However there’s still no Firewall-config available to fedora17 users, so I’m stuck until I uninstall firewalld, to revert it to the old firewall setup and use System-config-Firewall.

    My other machines have clean installs of Fedora18 and they seem to be complete with Firewalld and the Firewall-config components as expected.

  2. firewall-config is listed in the comps groups for MATE, GNOME, KDE, Xfce, LXDE and Cinnamon in F18. I just checked. Consequently it will be included in standard installs of all those desktops. You must have done either an upgrade from F17 (though you would not be automatically switched from iptables to firewalld in that case: you must have done it manually), or a very unusual install of F18, to hit this. The only package group which actually includes system-config-firewall at all is the admin-tools group, which is not selected by default.

    1. After double-checking, the system was actually an upgrade from 17 to 18. Sometimes it’s difficult to keep accurate track of things with so many installs going on at the same time. But no, nothing was installed manually on the system.

      That said, I think FedUp should be able to handle upgrading everything on a system in the future.

      Btw, FedUp is a great tool. Already pitched it to the guys at ROSA Laboratory.

  3. Let’s see. You upgraded an older system that had system-config-firewall installed. When you ran it, it told you you have to use a different tool now. This is because the underlying system changed. It tells you what tool as well. So it looks like Fedora did a great job of upgrading your system and telling you what you should do for the new functionality.

    And in a clean install (as was mine) it installs the new tool by default, and it works.

    I’m not entirely sure what Fedora is doing wrong here. They provided a clear explanation of the migration path. What more could you expect ?

  4. What’s the issue? I never use these kind of tools for configs. I’d like to control what’s exactly in the config and the only way to do this is edit manually…

  5. I think this was an upgrade from a previous installation, but even at that, it speaks to the thoroughness or lack of FedUp or whatever upgrade script was used.

    Because even if this was an upgraded system, the whole point of an upgrade is to upgrade an installation – apps and all.

    1. Are you saying that if I upgraded a system that was running the old firewall application, that the upgrade script will not install the new script?

    1. Another possibility is an upgrade issue if previously system-config-firewall was the norm. I, too, found firewall-config present with a format and clean install of the root partition.

Leave a Reply to Wojciech Cancel reply

Your email address will not be published. Required fields are marked *

Get the latest

On social media
Via my newsletter
Mailchimp Signup Form

Partner links

1. Attend Algorithm Conference, a top AI and ML event for 2021.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.
Hacking, pentesting distributions

Linux Distributions for Hacking

Experts use these Linux distributions for hacking, digital forensics, and pentesting.

Categories
Archives

The authors of these books are confirmed to speak during

Algorithm Conference

T-minus AI

Author was the first chairperson of AI for the U.S. Air Force.

The case for killer robots

Author is the Director of the Center for Natural and Artificial Intelligence.

Why greatness cannot be planned

Author works on AI safety as a Senior Research Scientist at Uber AI Labs.

Anastasia Marchenkova

An invitation from Anastasia Marchenkova

Hya, after stints as a quantum researcher at Georgia Tech Quantum Optics & Quantum Telecom Lab, and the University of Maryland Joint Quantum Institute, I’m now working on superconducting qubit quantum processors at Bleximo. I’ll be speaking during Algorithm Conference in Austin, Texas, July 16 – 18, 2020. Meet me there and let’s chat about progress and hype in quantum computing.