Tutorials/Tips, Ubuntu

Install Ubuntu 11.10 on external hard drive, with an ntfs partition at the end

How to install Ubuntu 11.04 on external hard disk, showed how to install Ubuntu 11.04 on a portable USB hard drive. This tutorial, written for Ubuntu 11.10, takes it a step further by showing how to add an NTFS partition at the end of an external drive – after installing Ubuntu.

It is a very simple process, but if you a new to this, and need some hand-holding doing it, this tutorial should be all you need.

To start, you need to, if you have not already done so, download an installation image of Ubuntu 11.10 from here. And of course, you need an external USB drive attached to the computer that you are going to use. So, burn the image you downloaded to a CD and boot the computer from it.

Note: This tutorial was written for Ubuntu 11.10, but may also be used if you want to install Ubuntu 12.04 or any other Linux distribution based on Ubuntu Desktop to an external hard drive.

When the computer boots, you may start the installer prior to it booting into the Live desktop, or from the Live desktop. Click through the first few steps of the installer until you get to the step shown in the image below. Because installing Ubuntu on an external hard drive requires creating partitions manually, select the last option – Something else. Click Continue.
Install Ubuntu External Disk

That will bring you to the Advanced partitioning tool. If, as the case with mine, the computer you are using for this installation has only one hard disk in it, the external hard disk should be listed as /dev/sdb. And if there are any existing partitions, they will be listed below it. Delete them: Select each one and click Delete.
Ubuntu 11.10 Advanced Partition tool

After the delete operation, the window should look just like the one below. Time to start partitioning the external hard drive. If you are new to disk partitioning in Linux, it is recommended that you read guide to disks and disk partitions in Linux. Manual disk partitioning guide for Ubuntu 11.04 is also recommended. Though written for Ubuntu 11.04, it is also useful for Ubuntu 11.10, because the installers are the same.

Related Post:  Creativity: The key to the Virtual Reality gambling experience of the future

Objective: Create three partitions for Ubuntu. These will be for the boot partition, / (the root partition), and Swap. In the process, leave enough disk space at the end. That free space will be used to create the NTFS partition. That NTFS partition will be configured from Windows, so it helps if you have a Windows system.

To start creating partitions, select the free space of sdb and click Add.
Ubuntu 11.10 Add Partition

The first partition will the boot partition. A disk space of 500 MB is more than enough for this partition. Ext4 is the file system, and be sure to select /boot for the mount point. Note: For this tutorial, all three partitions will be created as primary partitions, but you may use the default, which creates the first partition as primary and the rest as logical partitions. Click OK.
Ubuntu 11.10 Add Boot Partition

For the second partition, which will be mounted at /, assign as much disk space as you want to use for Ubuntu. Ext4 is also the file system, though, you may use btrfs or any other supported file system. OK. For help with btrfs on Ubuntu, consider reading how to install Ubuntu 11.04 on a btrfs file system.
Ubuntu 11.10 Add Root Partition

Related Post:  Eyes in the Sky: The Rise of Gorgon Stare and How It Will Watch Us All

For the third and the last partition, for Swap, about 4 GB is good. Select “swap area” from the “Use as” dropdown menu. OK.
Ubuntu 11.10 Add Swap Partition

With all the partitions created, the advanced partitioning tool window should now look like this. Note the free space under sdb. That will be used for the NTFS partition. Because the installer will want to install GRUB, the boot loader, in the MBR of the internal hard drive, sda, the next task is to select sdb, the external hard drive, from the “Device for boot loader installation” dropdown menu.
Ubuntu 11.10 Complete Partition

After making that change to the boot loader device, the window should look like this. Click Install Now to continue with the rest of the installation.
Ubuntu 11.10 Select GRUB Location

Though not required, at the step shown in the image below, you might want to enable the option to encrypt your home folder. That is the only feature of the installer that you can use to protect your data, if you lose the external drive or if it is stolen.
Ubuntu Install External Drive

Please share:

We Recommend These Services

Register now for Big Data & AI Conference, international Big Data and AI conference in Dallas, TX (USA), June 27 - 29, 2019

Reasons to use control panel for your server

Register for the End-to-end Machine Learning with TensorFlow on Google Cloud Platform workshop. It will be conducted by the manager of Google's Cloud AI Advocacy team

Launch an SSD VPS in Europe, USA, Asia & Australia on Vultr's KVM-based Cloud platform starting at $5:00/month (15 GB SSD, 768 MB of RAM).


  1. Mohan Kumar Sagadevan

    Can the additional Free space after completion of partition for Ubuntu be used as external storage to store files?

  2. komodoninja

    I followed these instructions using Ubuntu 12.04 LTS on a Windows 8 (upgraded from 7) system to my external HDD. The install goes fine, but when it tries to reboot after it, it just goes to a black screen and never makes it to a menu at all, like it isn’t actually booting. I tried reformatting the external and installing Ubuntu again, but it was to no avail. I’m using the x64 version since that’s the version of windows 8 my system runs, I figured the safest bet was to stick to that, and on the download page for Ubuntu it says to use 64 for any windows 8 systems.

    If you can help in any way, it would be appreciated

  3. Hey, I did this install and its works great. Linux works great whenever I have my external hard-drive in. However whenever I try to boot my computer normally (without the ext hard-drive in) it goes to the grub rescue command prompt. The OS on my int hard-drive is Windows 7. Is there a way to make it boot right to Windows 7 if I don’t have the ext hard-drive in?

    • Without the ext. HDD in, are you able to boot Windows?

      • No, it just goes to the grub command prompt and says “Error: no device identified”. I can go to my BIOS and try to boot from my int hdd with the same result.

        • I think GRUB was installed in the MBR of the int disk, rather than that of the ext one. To fix it, connect the ext disk and boot into Ubuntu. Then open a shell terminal and type sudo grub_install /dev/sdb. That will install GRUB in the MBR of the ext disk. If in doubt as to the device name of the ext disk, the output of df -h will tell you. Hint: the int disk will be /dev/sda.

          Then reboot the system and boot into Windows. Once in, use EasyBCD to reinstall the Windows boot loader in the MBR. This article will help, if you don’t know how to go about it.

          That should take care of it.

          • ok so now I have the opposite problem. I went on linux and tried sudo grub_install/dev/sbd1 (that showed up from the df -h command) and it said command not found. I went to the EasyBCD and reinstalled the boot loader and now when I boot without the ext hdd it goes to Windows 7 like it’s supposed to. However if I plug the ext hdd and boot from usb it goes straight to Windows 7 instead of grub 2.

          • Blame the command not found error one me. That command should be grub-install (notice the diff.?).

            Is that /dev/sbd1 or /dev/sdb1? (notice the diff.?). Using /dev/sdb1 as the target installs GRUB in the first partition of the disk rather than in the MBR. It should still work, but the recommended location is the MBR. The command should have been sudo grub-install /dev/sdb.

            All that aside, the good news is that you can boot into Windows and you still have the ext disk. The path of least headache to fix this – assuming you don’t have VIP files on the ext disk, is to reinstall. But before starting on that path, disconnect the SATA cable to the int disk, so that the installer never even sees it.

          • i actually don’t have a sata hdd. I have a samsung ssd PM810 2.5″ 2 256GB as my int hdd. My ext hdd is a HP Portable HD BB07 USB if it matters.

          • It’s still SATA, so if the unit is a desktop, ypu can disconnect the SATA cable, If a lappy, you may then remove the int disk from the list of bootable devices in the BIOS or UEFI setup utility, and proceed with the reinstallation.

  4. I want to know.
    How if I was already make an NTFS partition in the begining of the external drive. I will make the other partition for linux soon, then, will It work?


Leave a Reply to finid Cancel

Your email address will not be published. Required fields are marked *