Figure

After several failed attempts to dual-boot Ubuntu 15.04 and Windows 10 on a single hard drive and on a computer with UEFI firmware, and not knowing what caused the first failed attempt, I figured that subsequent failed attempts must have been due to an existing Ubuntu GRUB folder in the Boot EFI folder.

Especially since the machine always froze when the installer is attempting to install GRUB

So I thought that If I could just delete the ubuntu folder from the Boot EFI folder, that the installation would complete – successfully. Ultimately, it didn’t, but I figured out how to delete GRUB files from inside Windows 10, from the command line.

This post documents how it was done. It involved, from the command line, listing and selecting the detected hard drives, listing the partitions on the hard drive, then, finally, listing and deleting the target folder. Another reason you might want to do this, is if you deleted the Linux partitions, which would not automatically delete the GRUB files from the Boot EFI folder.

To start, log into Windows 10, click on the menu and type cmd. Then right-click on the terminal application’s icon and select run as administrator. Figure 1 show the commands (underlined) used to accomplish the first step – listing and selecting the hard drive. To make it possible to copy-and-paste, for those who might need to, I’ve provided the commands in the code block after the last image.

Related Post:  Disk Encryption in Fedora 16

In this figure, the target disk is shown as a 465 GB hard drive, with GPT partition.

Windows 10 diskpart
Figure 1: Using diskpart to list hard drives detected on Windows 10

After the target disk has been selected, its partitions are listed, so that the partition (volume) that corresponds to the Boot EFI folder can be identified. In Figure 2, that partition is Volume 2. It’s usually the only volume with FAT32 in the Fs (file system) column, and System in the Info column. After it has been identified and selected, you assign it a drive letter to make it easier to work with. In this example, I assigned it a drive letter D. After that, exit diskpart.

Listing Windows 10 partitions
Figure 2: Listing disk partitions on Windows 10

The final task involves changing into the Boot EFI folder, listing its contents to identify what subfolder the GRUB files would be. It will be in the EFI folder. The GRUB files for the distribution that was installed will be under a folder of the same name as the distribution. For example, if Ubuntu was installed, as in this example, the name of the folder will be ubuntu. Delete the folder using the rmdir /s command. That’s the Windows 10 equivalent of the Unix/Linux rm -r command.

Delete Ubuntu Boot EFI GRUB files
Figure 3: Deleting non-empty Ubuntu GRUB directory in Windows 10

All the commands used are given in this code block. Note that this procedure is not necessarily the best or only way to go about do this, so if you know of a better method, post a comment.

## These commands are used to identify and select the hard drive

diskpart

list disk

sel disk 0

## These commands are used to list the partitions, select the Boot EFI partition, 
## then assign it a drive letter

list vol

sel vol 2

assign letter=D:

exit

## These commands are used to change into the Boot EFI folder and delete the GRUB folder

cd /d D:

ls

ls EFI

cd EFI

ls

rmdir /s ubuntu

Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hola! Did you notice that LinuxBSDos.com no longer runs network ads?  Yep, no more ads from the usual suspects that track you across the Internet.  But since  I still need to pay to keep the site running, feel free to make a small donation by PayPal.

Subscribe for updates. Trust me, no spam!

Mailchimp Signup Form

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event for 2020.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.

179 Responses

  1. Hello,

    Thank you for taking the time to post this, but if my computer is able to successfully boot into Windows 10 is it necessary to delete the GRUB files? When the boot in the bios is set to UEFI my computer has no problem booting Windows, I only run into problems if I set my computer to Legacy mode.

    Thank you for your response!

  2. Hi !

    I have installed Ubuntu 16.04 over Windows 10, But after installation pc directly boots into Ubuntu skipping GRUB menu.

    So I mounted EFI partition from Ubuntu and found that all the files are messed as grub from previous Phoenix OS installation also must exist there.

    Additionally before current Win10 installation , I had attempted successful MBR to GPT conversation of my HDD at expense of broken OS. At that time , as I remember , the Windows Recovery Menu files were created in EFI partitions(I got this when I read EFI partition from ubuntu live cd.)

    So now my problem is 2 fold .

    I want to clear all the junk files from efi.

    and I want to remove Windows Recovery Menu files and its option from Windows Boot Manager menu.

    I can boot in both OS by choosing from UEFI boot order at each boot.

    I really want to clear all this all mess.
    Can’t I just extract & copy required EFI files from both corresponding OS.iso files ?
    If YES , how to do that ?
    Which files to copy ?

    Thanks for Patience to read such a long question and looking forword for help 🙂

  3. Actually, first i removed the ubuntu partitions and then i used aomei partition assistant to fix mbr. But when i reboot my pc , grub open.Somehow i was able to log in to windows and i followed your steps. But after the rmdir command, it shows “The system cannot find the file specified”.
    Could you help me?

    1. If you’re working on a UEFI system like this, MBR does not come into play.

      Maybe the file has been deleted by aomei, which you really didn’t have to use.

      Where you planning on installing another Linux distribution?

      1. Hey I am trying to remove the ubuntu grub. I followed all your steps till rmdir /S ubuntu
        but this gave me the error “The system cannot find the file specified”.

        Can you please help me out?

          1. I was doing it from the right directory. I rebooted and did it again. It worked the second time. Thank you very much for your post. It saved me at least couple of hours. I was going crazy.

  4. I made it all the way until the “ls” command. From there it says “‘ls’ is not recognized as an internal or external command, operable program or batch file.” This is causing me to have a Minimal-Bash error when I start up my computer. Any advice?

  5. I had deleted the ubuntu partition on a dual-boot system (Windows 10 was the original operating system) and couldn’t get rid of the GRUB showing up at each start-up or when calling back the system from sleep modus. Now it is fixed thanks to your valuable contribution! Thanks again! Fairly direct and simple 😉 :* :* :*

  6. Thank you! As others have mentioned had to replace ls with dir but then all good. I had removed an unsuccessful install of Android but didn’t know how to get rid of grub.

  7. I had created a new drive named U, and had followed all your steps. Thanks to you, it worked perfectly! 😀
    Now, how do I remove the new drive U created? Is it safe to format the U drive? Or will it affect my EFI of Windows?

      1. A new drive letter U. But it does get displayed in My Computer right, with a separate allocated memory of 256MB. How do I deallocate this memory?

  8. Just tried this, sadly it didn’t work. Although everything looked as if it worked, I go into my bios and I still see the ubuntu partition. I believe it’s what’s causing my live USB’s to go wrong as it’s using the GRUB instead of the loader on the USB.

  9. Thanks! Unlike the procedure of restoring the MBR, this worked when I was having trouble booting Windows 10 after deleting a dual-boot Ubuntu-partition.

Leave a Reply to Deepak Cancel reply

Your email address will not be published. Required fields are marked *

Get the latest

On social media
Via my newsletter
Mailchimp Signup Form

Sponsored links

1. Attend Algorithm Conference, a top AI and ML event for 2020.
2. Reasons to use control panel for your server.
3. DHgate Computers Electronics, Cell Phones & more.
Hacking, pentesting distributions

Linux Distributions for Hacking

Experts use these Linux distributions for hacking, digital forensics, and pentesting.

Categories
Archives

The authors of these books are confirmed to speak during

Algorithm Conference

T-minus AI

Author was the first chairperson of AI for the U.S. Air Force.

The case for killer robots

Author is the Director of the Center for Natural and Artificial Intelligence.

Why greatness cannot be planned

Author works on AI safety as a Senior Research Scientist at Uber AI Labs.

Anastasia Marchenkova

An invitation from Anastasia Marchenkova

Hya, after stints as a quantum researcher at Georgia Tech Quantum Optics & Quantum Telecom Lab, and the University of Maryland Joint Quantum Institute, I’m now working on superconducting qubit quantum processors at Bleximo. I’ll be speaking during Algorithm Conference in Austin, Texas, July 16 – 18, 2020. Meet me there and let’s chat about progress and hype in quantum computing.