Partner links

Manual disk partitioning guide for Linux Mint 17 KDE

UEFI boot menu

This tutorial provides a handy, manual disk partitioning guide for the KDE edition of Linux Mint 17, which comes with an installer that has an interface that’s slightly different from that used on the Cinnamon, MATE and Xfce editions.

The installer has automatic and manual disk partitioning options, with support for UEFI systems, which means that the installer is able to create partitions based on an MBR or a GPT partitioning scheme. In the automated mode, there’s support for creating plain-vanilla (no encryption) LVM partitions, and also for encrypted LVM partitions.

If the 3-letter acronyms used so far are foreign to you, take a few moments and read Guide to disks and disk partitions in Linux and The Benefits of Using Linux Logical Volume Manager.

And while you are at it, you also need to download an installation image of Linux Mint 17 KDE, which is available here. After downloading it, you may burn it to a DVD or transfer it to a USB stick. Using a USB stick is recommended. See this forum post for how to get it done in Linux.

Whether the installer creates MBR- or GPT-based partitions depends on what form of the installer you boot into. You can see the (two) options by accessing the computer’s boot menu. When you reboot the computer with the installation media in the optical drive or in a USB port, press the F key that will bring up the computer’s boot menu. It’s usually one of the high F keys. On my computer, it’s the F11 key. Accessing the boot menu allows you to choose what form of the installer to boot into. If your computer’s boot menu is anything like mine, you should see two entries for the installation media. One should start with USB: …, while the other should start with UEFI: …. Booting into the former will allow you to create partitions based on an MBR scheme, even on a computer with UEFI firmware, while booting into the latter will allow you to create partitions based on a GPT partitioning scheme.
UEFI boot menu

In this tutorial, I’ll offer, where possible, a step-by-step on how to create partitions manually based on the different schemes – MBR, GPT and LVM. This screenshot shows the installer’s disk partitioning types or methods. All the partitioning schemes work very well in the automated options shown in this screenshot. However, not all are supported when creating partitions manually. Manual disk partitioning is made possible by the installer’s Advanced Partition Tool.
Linux Mint KDE partition methods

To access the Advanced Partition Tool, you would select the Manual option as shown in this screenshot. The rest of this tutorial will show how to create partitions using the Advanced Partition Tool.
Linux Mint 17 KDE manual partition

Create MBR Partitions Manually: Partitions of this type are created on older computers or on newer computers, that is, those with UEFI firmware, after booting into the non-UEFI form of the installer. This screenshot shows the list of partitions created by the installer’s automated mode. Just two partitions are created – one for the main (root) partition and another for Swap. When creating partitions manually, it might be necessary to create a separate partition for the boot program and its files, and also a separate one to house users’ home directories.
Linux Mint 17 KDE MBR partition

To create partitions manually, there has to be enough free space on the target hard drive. If there’s not going to be another operating system on the hard drive, delete any existing partitions to create the free space. If the Linux Mint 17 KDE installation is going to share the hard drive with another OS, like Windows 7 or Windows 8, you may have to shrink the Windows C drive to create enough free space. See How to resize or shrink a partition or the C drive in Windows 7.

Once the free space is ready for use, select it and click on the Add button.
Linux Mint 17 KDE manual partition

That should open the partition editor, shown in this screenshot. To demonstrate how to create the partitions, four will be created here. One each for the boot partition, the main (root) partition, the home partition, and a Swap partition. In the partition editor’s window, you need to specify a size, file system (chosen from the “Use as” menu) and a mount point.

For the boot partition, which should be mounted at /boot, a size of 250 MB should be more than enough. From the “Use as” menu, select Ext2 file system. That, by the way, is the default. Click OK.
Linux Mint 17 KDE create boot partition

For the root partition, set the mount point to / and the file system to Ext4 journaling file system. For the size, 20 GB (20,000 MB) should be enough, considering that the minimum recommended is 9.2 GB. Click OK.
Linux Mint 17 KDE create root partition

For the home partition, set the mount point to /home, the file system the same as that for root, and a suitable size for the disk space OK.
Linux Mint 17 KDE create home partition

For the Swap partition, the trend in Linux distributions is to allocate anywhere from 2 GB to 4 GB. On older, 32-bit systems, 2 GB should do. Select swap area from the “Use as” menu, then click OK.
Linux Mint 17 KDE create swap partition

Back to the main partitioning window, all the newly created partitions should be listed. That’s all it takes to create a custom set of partitions for Linux Mint 17 KDE using an MBR partitioning scheme.
Linux Mint 17 KDE MBR partition

Share:

Facebook
Twitter
Pinterest
LinkedIn

Partner links

Newsletter: Subscribe for updates

Subscribe
Notify of
guest
8 Comments
Inline Feedbacks
View all comments
LIPO
LIPO
7 years ago

Thanks, it helped a lot. I used this method to install linux mint with my broken windows 7.

Vikram Chatterjee
Vikram Chatterjee
7 years ago

Aren’t you supposed to assign a mount point for the EFI boot?

Beniamin
Beniamin
8 years ago

Is there any reason you left 100GB unused space? You cannot partition it later, because you already have 4 primary partitions…

exa.link
8 years ago

Thank you for you insight. I plan to install mint in the next few days.

Mihir
9 years ago

I am trying to install Linux mint 17.1 KDE.Here,there is no option of primary or logical still I installed it but I am not able to boot it.pls help me.

Get the latest

On social media

Security distros

Hacker
Linux distros for hacking and pentesting

Crypto mining OS

Bitcoin
Distros for mining bitcoin and other cryptocurrencies

Crypto hardware

MSI GeForce GTX 1070
Installing Nvidia GTX 1070 GPU drivers on Ubuntu

Disk guide

LVM
Beginner's guide to disks & disk partitions in Linux

Bash guide

Bash shell terminal
How to set the PATH variable in Bash
Categories
Archives
8
0
Hya, what do you think? Please comment.x
()
x