Partner links

An attempt to dual-boot Ubuntu 13.10 and Windows 8 on a Lenovo IdeaCenter K450

Zemanta Related Posts Thumbnail

I had access to a friend’s store-bought (OEM) Windows 8 computer for just one day. The computer is a Lenovo model. Specifically the Lenovo IdeaCenter K450 with a Core i7 processor, 12 GB of RAM, and a 2 TB hard disk drive (HDD).

Very powerful machine.

It’s the first OEM Windows 8 machine that I’ve had access to, and so I attempted to set up a dual-boot system between Ubuntu 13.10 and Windows 8. At the installation type step of the installation process, the Ubuntu installer failed to detect Windows 8 on the HDD, informing me that the “computer currently has no operating systems.” I knew that couldn’t be right, so I chose the Something else option.
Partitions Windows 8

That gave me the true picture and I could see all the Windows 8 partitions. As expected, the partitioning scheme used is GPT-based.
Windows 8 OEM partitions

Because this was a friend’s brand new system, I decided it was better to install Ubuntu 13.10 on a second HDD, instead of alongside Windows 8 on the 2 TB HDD. I just didn’t want to take any chances, especially because of the custom partition setup on the Windows 8 HDD. The capacity of the second HDD I added is 500 GB.

Here are a few tips about the Lenovo IdeaCenter K450:

  • Access to the BIOS setup utility is via the F1 key
  • The boot menu can be accessed using the F12 key
  • Lenovo’s OneKey Recovery system can be accessed using the F2 key

From the BIOS setup tool, I determined that the Compatibility Software Mode (CSM) is disabled, and that with CSM disabled, the system will not show an HDD other than the one that came with the unit, that is, the one that Windows 8 is installed on. This screen shot shows the default settings of the entries in the Startup menu of the BIOS setup utility.
Lenovo IdeaCenter K450 CSM disabled

This one shows the entries in the Primary Boot Sequence menu of the BIOS setup utility. The second HDD is not listed.
Lenovo IdeaCenter K450 boot priority

And this is what I could see from the Startup Device Menu (the system boot menu). Note that this was after connecting a second internal HDD.
Lenovo IdeaCenter K450 boot menu

So I had to enable CSM. This screen shot shows the new state of the entries in the Startup menu of the BIOS setup utility.
CSM enabled Lenovo IdeaCenter K450

I could then see the second HDD in the Primary Boot Sequence menu. That is the one on the “SATA 2” line.
Lenovo IdeaCenter K450 boot priority

And this is the Startup Device Menu after enabling CSM. Now I can make another attempt to install Ubuntu 13.10 on the system, this time, on the second HDD. And just to ensure that the installer does not mess with the Windows 8 HDD, I disconnected both the SATA and power cables. Accidents do happen and I’ve had very bad experiences with this type of attempt. Note that I took the screen shot after changing the boot order of the HDDs.
Lenovo IdeaCenter K450 boot menu

So I successfully installed Ubuntu 13.10 on the second HDD, rebooted the system, but it failed to boot into the Linux OS. All I could see was a flashing cursor and this error message: “Error 1962. No OS found. Boot sequence will automatically repeat.” I knew that couldn’t be right because I had just installed Ubuntu on the second HDD, so I rebooted into the USB stick I used to install Ubuntu again just to see what it would tell me. This screen shot shows the installer’s installation type step. This confirmed what I already knew.
Lenovo4

And from the installer’s Advanced Partitioning Tool window, I could see the default partitions it created. It, too, used a GPT-based scheme.
Lenovo5

But I still couldn’t boot into Ubuntu. At this time, I decided to reconnect the SATA and power cables on the Windows HDD, set the second HDD to be the primary disk and rebooted. That didn’t give the Error 1962 message, but it would not boot into Ubuntu, only into Windows 8. After spending more time that I thought was necessary to set up a dual-boot system, I called it quits. Dual-booting was never a difficult task until Microsoft pulled the Restricted Boot stunt.

So that was my unsuccessful attempt to dual-boot Ubuntu 13.10 and Windows 8 on a store-bought (OEM) Windows 8 machine. I’ll still like to give this another shot when I have access to another OEM Windows 8 for much longer than I had the Lenovo IdeaCenter K450.

Share:

Facebook
Twitter
Pinterest
LinkedIn

Partner links

Newsletter: Subscribe for updates

Subscribe
Notify of
guest
7 Comments
Inline Feedbacks
View all comments
Kris
Kris
9 years ago

Hi, I have been struggling with this problem for sometime now. I have an ideacentre k410, which is basically the same as the 450 and the Uefi-bios is the same… and I have had no end of trouble with this issue.

So, I bought the computer to be a “dual-boot” machine. I am studying, and I wanted to dual-boot to Ubuntu-Server for working with terminals and network architecture.

I can’t tell you how much trouble I’ve had. I just tried re-installing Server again on a second hard drive (much the same as described above) and I’m still having no luck. This is my 8th or so attempt and 4th OS.

Here is something though; something much stranger. There are “ghost” entries in my Bios Boot-order. Seriously. When I go to the boot order screen there are two options named “ubuntu” and when I go to settings these are listed as ‘other devices’.

So, I unplugged all hard drives, and thumb drives and re-booted… sure enough they were still there. What are they!? There are no devices for the Bios to be finding these on. It’s not a network thing, because even if PXE wasn’t disabled, it’d still be listed under PXE…

Any ideas? Thanks!
-Kris

Nikos
Nikos
9 years ago

Thanks for posting! I too am having trouble setting up K450 to dual boot. I cannot even make it as far as you did, the PC will just not boot from my 12.04 live usb thumb drive (which I’ve used to boot from many times before).

My Bios boot settings are how they should be:
CSM -> Enabled
Boot Mode ->Auto
Boot Priority -> Legacy first
Quick Boot -> Enabled
and under Primary Bott Sequence, all the USB devices are before the hard drives. Interestingly, when I disabled Quick Boot the PC would beep on booting, and then proceed to boot in Win8 as normal.

Very annoying…

Gary Newell
10 years ago

I have a store bought Windows 8 machine. (It is a Dell though so that might help).

I didn’t have too many hassles dual booting Ubuntu 13.04 with it.

I have also dual booted Kubuntu 13.10 and Xubuntu 13.10 with it.

John Spence
John Spence
10 years ago

In my local LUG there are a lot of Ubuntu users with different types of hardware. Everyone of them has had a problem doing what you tried. Personally, I believe that it is Ubuntu causing the problems. I will admit that I tried it one time and it didn’t recognize half of my hardware. I moved on to other distros like Debian, Slackware and Fedora. Before Christmas I bought myself an Acer Aspire M Ultra laptop running Intel core i5, 500g drive, 6g ram. It also has a 20 g ssd. The first time I tried to install Fedora I messed something up and wiped my install of Windows 8 which came on the machine. I reinstalled Windows 8, used gparted to shrink the partition and installed Fedora 19 on it without a hitch. UEFI identified it and it is running under secure boot just like Windows. Not bad for an old guy who plays with Linux.

If you get a chance, try Fedora, it is a very good distro that stays current.

john

Get the latest

On social media

Security distros

Hacker
Linux distros for hacking and pentesting

Crypto mining OS

Bitcoin
Distros for mining bitcoin and other cryptocurrencies

Crypto hardware

MSI GeForce GTX 1070
Installing Nvidia GTX 1070 GPU drivers on Ubuntu

Disk guide

LVM
Beginner's guide to disks & disk partitions in Linux

Bash guide

Bash shell terminal
How to set the PATH variable in Bash
Categories
Archives
7
0
Hya, what do you think? Please comment.x
()
x