Partner links

Manual disk partitioning guide for Linux Mint Debian

LMDE Default Partition

Since the plan is to create four partitions, the best option after creating the boot partition as a primary partition, is to create the others as logical partitions. But before creating logical partitions, you first have to create an extended partition. If all this is foreign to you, read guide to disks and disk partitions in Linux.

To create an extended partition, select Extended Partition from the Create as dropdown menu. Specify the size for this partition, then click Add. Note: The target hard disk used for this tutorial is 300 GB in size. I chose to use just half of that for Linux Mint Debian. The other half I reserved for a possible dual-boot configuration with another distribution.
LMDE GParted Create Extended Partition

This is just to show the layout with the extended partition. Note that there are two unallocated partitions. One is under the extended partition, the other, is not. We will be working with the former. So select it and click the new button.
LMDE GParted

The first logical partition will be the root (or /) partition. All you need to specify here is the size. Because resizing a non-LVM partition is not a simple process, be generous here. For this test installation, I allocated 20 GB to it. That will be more than enough for an installation of Linux Mint Debian. Note that a new installation of the MATE/Cinnamon edition takes up about 6.3 GB of disk space. Add.
LMDE GParted Create Root Partition

For the partition that will be mounted at /home, I allocated the bulk of the remaining disk space. Add.
LMDE GParted Create Home Partition

Swap takes up what is left. For this partition, select linux-swap from the File system dropdown menu. Add.
LMDE GParted Create Swap Partition

Bact to the main GParted window, click the apply button to finalize the operation, the quit GParted.
LMDE GParted Quit

That should bring you back to the main installer window. Click the Refresh button to see the new partitions.
LMDE Refresh Partition

This is what the window should look like after the refresh and after you have edited each partition to specify the mount point and file system type. To edit a partition, double-click on it, or right-click on it and select Edit. Finally, click on the Forward button to continue with the rest of the installation.
LMDE Partition Completed

This is what the edit partition window look like. You just need to select the mount point and file system type for each partition. Note that ext4 was used for the file system type for all the partitions. It is not necessary to edit the Swap partition.
LMDE Edit Boot Partition

By default, the installer will offer to install GRUB, the boot loader, in the Master Boot Record (MBR) of the disk. If, as in this example, Linux Mint Debian is the only OS on the hard disk, the MBR is the proper place to install GRUB.
LMDE Install GRUB

Share:

Facebook
Twitter
Pinterest
LinkedIn

Partner links

Newsletter: Subscribe for updates

Subscribe
Notify of
guest
25 Comments
Inline Feedbacks
View all comments
lol
lol
8 years ago

y is this kinda retarded? lmde not recommended and ext2 instead of ext4 ???

Dagon
Dagon
10 years ago

Is this “old”? I am trying to install Mint for the first time, and the Debian installer is completely different than this. It asks me about chroot, writing my own /etc and /fstab, and I have no idea what that stuff is.

But it basically tells me that I should simply delete my entire hard drive if I don’t know what that stuff is, meaning it is not in any way “newbie friendly” any longer.

J. MANUEL
J. MANUEL
11 years ago

I have made six LMDE installations on six different boxes using i5 and i7 processors no problems whatsoever, flawless installation with this partitioning guide; prior to finding this guide I could no pass partitioning, well I am a beginner, for the experienced users this may sound silly, but for those who are not, the road ends there.

J. MANUEL
J. MANUEL
11 years ago

THIS IS ABSOLUTELY BRILLIANT !!!!! I’ve been looking for a long long time, a hard drive partitioning guide, or tutorial for a debian based distro that is clear, concise, objective, simple, practical, one that will not leave guessing if I did it correctly. This is how a guide/tutorial should be made A million thanks to those who made this possible. This is going to make a lot of potential users very happy.
WOW, what a fantastic job. Congratulations !!!!!!

Michael Leones
Michael Leones
11 years ago

I made the first comment about this article and it is lack of benefits and got flamed. Just read the documentation of Gparted. Now they also provide as a live distro and you can do lots of stuff with it.

brainout
brainout
11 years ago

This tutorial may have sufficed back last April, but it isn’t working, now. First time I tried to preconfigure the partitions per the tutorial, and got a message saying the bootloader partition was too small. So then I started over with a brand new stick which only had a FAT32 partition, and through the installer’s version of GParted (which is different from Mint 13’s, which I’d used to pre-partition the first time), I reconfigured the partitions, still following the tutorial. It worked until it got to the bootloader at the END. It’s been in a hang now for about 45 minutes, claiming still to be configuring the bootloader.

This is the same problem I had when installing Debian itself to a stick, letting it decide what partitions to use. It also configured a boot of 524 MB, but it was FAT32, not ext2. And it also bombed. After, spending 15 whopping hours insisting on downloading updated package from the internet, which I couldn’t stop it from doing. So there I lost 15 hours and ended with the same problem, so it didn’t install, even though it closed and said the installation was successful. Wouldn’t boot, claimed to be looking for a hard drive in conjunction with the pen drive.

I don’t get the logic of installing the bootloader LAST. Nor do I understand why, if the boot is specified at a certain sdX, it doesn’t ‘remember’ to look there.

My Mint 13 pendrive installation went just fine, but with a very different procedure.

So now I’ll try redoing it, but will change the boot partition to FAT32 and make it 1GB or so.

brainout
brainout
Reply to  brainout
11 years ago

RESULTS FAIL. Still the same hangup at the end, ‘configuring bootloader’ going on and on and on after all else is installed, with the result that you have to kill the process and everything but grub got on the stick. So the problem is in the installer. If the problem were in the size of the boot partition, or its formatting, something should have alerted the user to that. So a bigger partition and even on FAT32, didn’t help (I tried up to 2GB limit).

However, the install went faster when I used a 2GB FAT 32 as the boot partition, else nearly same specs as the tutorial (I’m using a Kingston 64GB pen drive, not a hard drive, but allocated 30GB to root, 20GB to home, same 4997 for swap, middle two inside extended partition which the installer reformatted from ext2 to ext4, each).

So, I quit trying. Mint 13 and Fedora 17 work well, the former using Unetbootin, the latter using its own hard drive installer. Pity.

Pete
Pete
11 years ago

Thank you, thank you, THANK YOU for posting this! I had made three unsuccessful attempts at installing this distro, failing because I’m still unfamiliar with the fine art of partitioning. Frankly, I don’t care if the author copied these instructions from a $hithouse wall – they WORKED SUCCESSFULLY for me and I am now running this distro. I was on the verge of giving up. I’m glad I found this information.

James
James
11 years ago

Thank you
I work a grave yard, 10:30 pm to 6:30 am and any help i can get is appreciated. The one thing to point out to the audience would be a partition in Linux is a partition in Linux yet its the GUI to the cmi that can be difficult to navigate at times.
As far as miss priss Leons, thats sad, must have been a full moon and needing some one to rag on.
Suggested partition size for /var would be good advice.
Thanks

Quash
Quash
11 years ago

Great guide. Simple and it works. I really appreciate the step-by-step with screenshots, along with the explanation about why/why not certain steps are necessary. I have used distros before Fedora Project, before Ubuntu, back when SuSE did its first LiveCD. The one thing I have always found daunting is partitioning, so I’ve always avoided doing it manually. Your tutorial made it a breeze. Thanks!

Mapa
Mapa
11 years ago

i am fresh begginer in linux stuff ===>> TOTAL NEWBIE

i just wanna to say that this artice helpd me a lot and i dont care if it is an original or some copy of something, all i care is that it HELPD me understand how it is done (i hope i done it right and i hope it will work), and it pop up first on my google search!

THX to author

BenM
BenM
11 years ago

Leslie, my first distro was so long ago that we had to allocate different batches of punched-cards instead of partitions. Keeping the “Swap” cards in order was a royal pain. ;-))

Paul
Paul
11 years ago

I’m relatively new to all this and your tutorial helped me a lot. Thank you!

Michael Leones
Michael Leones
11 years ago

Actually, it is nothing but Gparted documentation. I don’t see any contribution. I don’t usually post negative comments but yours is not a big contribution

Michael Leones
Michael Leones
Reply to  finid
11 years ago

My comment was not a personal attack to you. Please don’t take it personal. Only your article does not contain some new information but looks like a time filler. I appreciate you and every one who contributes into Linux world. my $.02

BenM
BenM
Reply to  Michael Leones
11 years ago

And your negative comment is more than a “time-filler”? I’m a user/developer of Unix/Linux for 32 years. The contribution for beginners pulls together and simplifies some of the varied intro material on partitioning in a thoughtful & conversational style that is frequently appreciated by people less-knowledgeable and more timid that people such as yourself. If you have something constructive to add, please do so. If you were looking for specific additional information, you can ask for it. Surely, some one has done so before, but you would at least not demonstrate your grumpy negativism. Someone might even try to help you without disparagement.

Michael Leones
Michael Leones
Reply to  BenM
11 years ago

Thanks but no thanks for your $0.00 contribution. What is this issue got to do with your 32 years of knowledge? Linux really did not take off because of the brains like yours who can not even read a constructive criticism. I don’t remember asking for any help from you. The main issue is, this article gets shared around on the internet while doesn’t really bring new content into the help area but like chewing the same gum. Try to understand my comment before jumping into.

Rolf C Stadheim
Reply to  BenM
11 years ago

Michael L.,

what the **** is your problem? A brilliant article to ease the introduction for a newbie into the “scary” world of partitioning a hard disk! So what if one can gather all this from “the official documentation”? Does the article contain any errors? Has the author offended someone? DOES IT MATTER IF YOU DO NOT REAP BENEFIT FROM THIS? No, because plenty other “newbies” will! Take your “$0.2” and spend it somewhere else, please!

Leslie Satenstein
Leslie Satenstein
Reply to  BenM
11 years ago

Hi Ben,
I concur with your response about the value of the article.

My very first distro was Fedora 6, and therefore it is the one I know best. I did use Mint, but somehow, after a month of updates, it refused to boot. This happened more than once on different systems.

With Fedora (anaconda installer), and what appears to be anaconda in Linux Mint, I found that the best approach was to use gparted to define the partitions, and then delete the partition which I wanted anaconda to choose.

I would have loved to be able to use a GUI interface like Gparted, as part of the installer. This should be possible and desirable. I can think of simple ways this can be done.

And by deleting a partition and telling Mint to use the empty space, all I have left is to indicate which drive to use to install grub2.

Leslie in Montreal

BenM
BenM
Reply to  BenM
11 years ago

Wow. My bad. I misunderstood what your point of view was. Guess I’ve been reading waaay too much about SOPA, etc. I thought you were advocating the Web be restricted only to *original* content that actually *adds something of value*.

I wish more people like yourself–those that have a firm grip on judging what constitutes “originality” and “of value”–would post their thoughts on the matter as you have.

Oh, wait…they couldn’t post comments similar to your own, because, by definition, that content wouldn’t be “Original” or of “Added-Value”? Unless, would you be OK with posting web content that repeats what was online elsewhere so long as it had some kind of existential value?

I’m not sure if it would be “Original” to do so, but you just might want to elaborate on & post what you consider “Original” and”Added-Value”, so we could propose your observations, rules, formulas and criteria to the W3C for formal consideration. We’d also, of course, need to qualify/elaborate on some of the darn detail implode a good presentation.

It it not correct that your guiding critique applies to (*virtually) all content on the Web, not just the example before us consisting of educational material, such as “tutorials”?

It would speed adoption of the asserted content standard if you would provide us a robust model for quantifying the monetary value of content, as you demonstrated for us. While we would need to present specific logic, formula, syntax and valid processing methodology, I think it can be readily deduced the broad applicability said model would have regarding Web content.

Would content put online and addressed to one demographic or group, or presented in one context, knowledge-domain, language, presentation style, media type and/or vocabulary-level be considered “Original” or “Added-Value” if it was presented in a totally different context, knowledge-domain, language, presentation style, media type or vocabulary-level, etc.?

I think we can all agree that simply changing font size, color, page dimensions, underlying web-coding technique or sense of humor employed would not sufficiently differentiate content expressing the same “meaning” (same context or otherwise, TBD).

Lastly, expect significant push-back from Google, as the de-duplication and expungement of un-originality on the Web will have significant impact on their Adsense cash cow (although “overlapping content meaning” may provide sufficient room for negotiation…?)

Please kindly note, none of the above is meant to judge you personally for “Originality” or “Added-Value”. It’s just that I found dark humor in your comments, and wanted to share some back. This has also helped me distract myself from the dentist…that is apparently ready to seem me now.

Get the latest

On social media

Security distros

Hacker
Linux distros for hacking and pentesting

Crypto mining OS

Bitcoin
Distros for mining bitcoin and other cryptocurrencies

Crypto hardware

MSI GeForce GTX 1070
Installing Nvidia GTX 1070 GPU drivers on Ubuntu

Disk guide

LVM
Beginner's guide to disks & disk partitions in Linux

Bash guide

Bash shell terminal
How to set the PATH variable in Bash
Categories
Archives
25
0
Hya, what do you think? Please comment.x
()
x