Partner links

Dual-boot Linux Mint 11 and Windows 7

burg5

Dual-booting between a GNU/Linux distribution and Windows on a computer with one or more hard disks is a common practice for those who use both operating systems. It is a somewhat hassle-free approach to keeping a foot in both OS worlds. If you are new to Linux Mint and want to attempt dual-booting between Linux Mint 11 (see Linux Mint 11 review), the latest release of Linux Mint, and Windows 7 on a computer with one hard disk, this tutorial offers detailed instructions on how to accomplish the relatively simple task.

If your computer has more than one hard disk, the steps involved are virtually identical, and this guide can be of great help for setting up dual-booting on a computer with, say, two hard disks.

When configuring dual-booting on a single hard disk, the most important decision you will have to make is whether you want to install GRUB 2, the Linux Mint 11 boot loader, in the Master Boot Record (MBR) of the disk, so that when the computer boots, you will see this …
burg5

Or this, if you install Windows 7’s boot loader in the MBR.
MintyWin14

Regardless of the option you choose, the result is not irreversible. For example, if you install Windows 7’s bootloader in the MBR and you change your mind, you can very easily overwrite it with GRUB. The reverse is also true. As a bonus, the simple steps involved in changing the boot loader installed in the MBR is made available at the end of this article.

The system used for this tutorial has an existing installation of Windows 7. If your computer has an existing installation of Windows 7 too, your first task is to free up enough space from Windows7. That space will then be used for installing Linux Mint 11. It is just as easy to free up space during the installation of Linux Mint, but this is my preferred method. If the computer you want to use has an existing installation of Windows, but you want to reinstall it, you can save yourself some time by leaving some unpartitioned space on the hard disk.

Okay, enough preliminary stuff. Ready to start? Me too. One more thing. If you have not done so already, download an installation image of Linux Mint 11 from here, burn it to a CD or DVD and keep it around.

To begin, boot into Windows 7, type partitions in the menu’s search filed. That will start the disk management application shown here. You can see that there are two partitions – the System Reserved, and the C drive. The first task is to create space for Linux Mint 11 by shrinking the C drive.
MintWin

To do that, right-click anywhere on the drive and select “Shrink Volume…”
MintWin1

The disk management tool will always shrink the disk by half unless there is data in more than half of the disk. Unless you know what you are doing, click Shrink.
MintWin2

The surgical operation is complete. The Unallocated space is where Linux Mint 11 will be installed. Exit the disk management application, insert Linux Mint 11 installation CD or DVD and reboot the computer.
MintWin3

As it boots up you will see the boot menu. Linux Mint 11 is a Live CD/DVD, and you can only start installation from the Live environment. So, press Enter on the keyboard.
MintyWin

Once in the Live environment, click the Install Linux Mint icon on the desktop, then click Forward twice to get to the step shown here. The automated partitioner of the installer does not detect the free space, so the only way to partition and install Linux Mint 11 on it is to use the installer’s Advanced partitioning tool. To get to the Advanced partitioning tool’s window, select “Something Else,” then click Forward.
MintyWin1

Share:

Facebook
Twitter
Pinterest
LinkedIn

Partner links

Newsletter: Subscribe for updates

Subscribe
Notify of
guest
82 Comments
Inline Feedbacks
View all comments
Jose
Jose
12 years ago

Hello I would like to say thank you for this extremely detailed tutorial but i have a problem. I initially had windows 7 inatalled as my main os on my 1 tb hard drive. I split my drive in two and dual booted with ubuntu. Everything was working well. I decided to replace ubuntu with mint and now my computer will not boot either os. I have tried everything. I partitioned my hard drive with gparted using the live cd and it goes for about 10 min then the installer says it has crashed. I have burned the dvd twice using lower speeds but it still crashes. I have tried to reinstal ubuntu but it will not load it says.” Error: file not found. Grub rescue”. Its also the same thing that comes up when I try to boot windows 7. I havnt touched the 2 windows partitions and I’m confused as to why nothing will instal or boot. My last step would have to be to reinstal windows and I really don’t want to. I don’t have a windows instalation cd. Please help. Thank you for your time.

Jose
Jose
Reply to  finid
12 years ago

Yea the grub was missing.
I figured it out. The DVD wasnt burned right. I installed the oem mint version and repaired grub. Now everything is working perfectly. Thank you

iamfound
iamfound
12 years ago

Hello. I would like to get more space for other needs and need to remove Linux from my drive, which I installed with this tutorial. Currently I am using burg loader. My question is what’s the simplest and safest way to uninstall Linux, delete its partition and have only windows on my drive. Thanks a lot.

iamfound
iamfound
Reply to  finid
12 years ago

So to clarify things. In Windows Disk Management I just delete volumes with Linux on them, and then extend the Windows volume?

Adam F
Adam F
12 years ago

Thank you for the wonderful tutorial. Appreciate it.

Poena
Poena
12 years ago

I was busy installing Mint 11 to dual boot with Win 7 when I got stuck at the hard drive space and partition section.

Then found this website to help

Linux must be kidding ! right ?

You expect a newbie coming from Windows to do all this stuff just to install Mint ?

I will try again in 2015 when it becomes easier

Minn
Minn
Reply to  Poena
12 years ago

Poena,

You can choose the option to install Linux side by side with Windows and the installer will create all the partitions you need. The only thing you need beforehand is unallocated space, which you can easily create from the partition manager in Windows (follow the Windows steps at the beginning of this tutorial- also make sure you have less than 4 partitions total or the side by side option will not appear).

Hope you change you mind and give it a try!
-Minn

Syamil
Syamil
12 years ago

Thanks for your review. Now i choose Linuxmint 11 as my distro after i felt disappointed with Ubuntu 11.04.

R Votre
R Votre
12 years ago

Thanks for the suggestion about EasyBCD. That makes everything so much easier that it was worth reading the article for that tip alone. And the article was already worth reading without it. 🙂
Nicely done!

anon
anon
12 years ago

Thanks a lot for the tutorial!

Steve
12 years ago

Hi and thanks for a really great tutorial. Good detail and easy to follow. Unfortunately I have hit a snag with the unallocated space left after shrinking in Windows Disk management. Initially I had the following partitions on the disk, C: 107.4 GB with 21.2 GB used, sda2 = 10.7GB with 9.3Gb used, D: 131.9GB with 3.2GB used and sda4 = 18MB. I did a “shrink volume” as per your instructions on the D: drive and got 61.38GB of unallocated space for my Linux installation. However when I try to install Mint 11 and get to allocating drive space, the partition I created in Windows does not show as free space, it is labelled “unusable” and when I select it the “Add” button and all others are greyed out. I’m pretty much stuck at this point, any advice?

Steve
Reply to  finid
12 years ago

Thanks for the info. I am installing on an eee pc 1005PE. The 10GB partition is the Restore/Recovery partition. The 16MB partition is used by BIOS Boot Booster. I can live with out the Recovery partition as I have a recovery disk. If I delete the 10GB partition will it just add to the free space and allow more space for the Mint installation?

Steve
Reply to  finid
12 years ago

Thanks so very much for your help. Mint 11 now up and running brilliantly on my eee pc. Thanks again, Steve

Jorge
Jorge
12 years ago

Hi here!

Thanks for the excellent tutorial, it gave me confidence enough to try Linux Mint after too many years of W.

However, I do have a problem after having followed exactly all this procedure. The GRUB won’t load Linux Mint, I don’t even know it knows Mint’s there or what.

There’s no error message after I choose linux Mint in the menu. It only says like this :

GRUB4DOS 0.4.5b 2011-04-23, Mem : 635k/3326M/768M, End : 351489
[Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ]

After that,

grub>

for the line editing itself.

I have no idea of what to do, or what went wrong.

Could you please share some insight here? It would be most welcome.

Jorge
Jorge
Reply to  finid
12 years ago

Hello!

I must thank you for the early reply!

My disk is about 500Gb, with a windows partition of 70Gb. Fort the record, it’s an WDC WD5000AACS-00ZUB0 (Western Digital).

I don’t know how much platters (?) it has, however.

someone
someone
12 years ago

I really appreciate this tutorial, but I have a problem. When I try to shrink C:, it does not shrink completely in the sense that the program tells me that i can only shrink it of 17 gigabytes when there are over 50 gigabytes of free space. My virtual memory is on a different partition (but on the same hard disk)… can u help me?

someone
someone
Reply to  finid
12 years ago

ok, I’m trying to shrink from inside windows (7). The partition layout is the following: System Reserved [100 MB NTFS], (C:) [131.62 GB NTFS with 49 GB of free space], Virtual Memory (A:) [2.44 GB NTFS]

drond
drond
12 years ago

New fresh install of Windows 7, creating an extra partition of about 30GB for Linux Mint. Started installing Linux Mint per this article with all the required sda’s. After it installed successfully, it rebooted but then an error showed up. Now both Windows and Linux do not boot. Unfortunately I didn’t record the error, but it said something about grub error. Now I installed Windows 7 and left a partition for Linux but hesitate to start all over again if I don’t know how to avoid that error in the future. Please help.

drond
drond
Reply to  finid
12 years ago

Thanks. I did it once again and somehow it worked. I don’t really know what happened the first time, I think I did exactly the same way. Now I have a beautiful BURG screen with a selection between Win7 and Linux Mint 11!

yrk
yrk
12 years ago

Thank u very much. I got a problem now. For some reason I have to re-install win 7. Then I install EasyBSD and add entry as above. But it show some error when I select mint from boot loader. Do you know how to fix it.

TrboDawg
TrboDawg
12 years ago

Great tutorial, I appreciate the effort. My situation is slightly different in that I need to add Windows 7 to an existing Mint 10 machine. Is this practical? or should I just wipe the hard drive, install Windows, then Mint?
Thanks

mrsfixit
mrsfixit
12 years ago

Thank you for this awesome tutorial.
I followed it step by step and was able to install Mint 11 alongside Win 7, thanks to your instructions. The screenshots really helped a lot.
I don’t think I would have been able to handle the partitioning and boot manager setup without this guide.
Thank you very much!

windows lies
12 years ago

I installed that arrangement, and every time I connect Amazon.scum pings me- – why?

1 2 3

Get the latest

On social media

Security distros

Hacker
Linux distros for hacking and pentesting

Crypto mining OS

Bitcoin
Distros for mining bitcoin and other cryptocurrencies

Crypto hardware

MSI GeForce GTX 1070
Installing Nvidia GTX 1070 GPU drivers on Ubuntu

Disk guide

LVM
Beginner's guide to disks & disk partitions in Linux

Bash guide

Bash shell terminal
How to set the PATH variable in Bash
Categories
Archives
82
0
Hya, what do you think? Please comment.x
()
x